NS0-507 54 Q&S NetApp Certified Implementation Engineer-SAN, Clustered Data ONTAP By Kerwin

When implementing ONTAP SAN for VMware, in which three would VSC help? (Choose three.)

A. When provisioning the lun
B. When updating HBA driver
C. When configuring host best practices
D. When provisioning the datastore
E. When creating FC switch zoning

Answer Clike
What are three considerations when creating a physical reference diagram of an FC SAN? (Choose three.)

A. Hardware is compatible
B. FC SAN zoning is available
C. Power connectivity is available
D. FC port connectivity is available
E. FC switches are available

Answer Clike
You have 4-node cluster with a FAS8200 HA pair and AFF A700 HA PAIR. You need to move a LUN from the FAS8200 to the AFF A700 for faster performance.
In this scenario, which sequence of steps, accomplishes task nondisruptively?


A. 1. Remove the FAS8200 HA pair from file reporting-nodes list.
Add the AFF-A700 HA pair to the reporting nodes list.
Run the lun move command.
B. 1. Add the AFF A700 HA pair to the reporting-nodes list.
Run the lun move command.
Remove the FAS8200 HA pair from the reporting-nodes list.
C. 1. Run the lun move command.
Add the AFF A700 H pair to the repotting-nodes list.
Remove the FAS8200 HA pair from the reporting-nodes.
D. 1. Add the AFF A700 HA pair to the reporting-nodes list.
Remove the FAS8200 HA pair from the reporting-nodes list.
Run the lun move command

Answer Clike
Which two statements regarding data mobility, deduplication and compression are true? (Choose two.)

A. When a LUN is moved, storage efficiency savings are lost
B. When a volume is moved, storage efficiency savings are maintained for deduplication and compression
C. When a volume is moved, storage efficiency savings are maintained for compression but not for deduplication
D. When a LUN is moved, storage efficiency savings are maintained for deduplication and compression

Answer Clike
A storage administrator has created LUNs for FC access.
What must each LUN have configured to allow access?


A. LUN OS type set host OS, igroup with WWPNs from host HBAs, LUN mapped to an igroup
B. LUN OS type set host OS, igroup with all IQNs from host HBAs, igroup mapped to each FC port using port sets
C. Igroup with WWPNs from host HBAs, ALUA set on host using host utility kit, LUN OS type set to default values
D. LUN OS type set to default values, ALUA set on host using DSM, igroup with WWPNs from host HBAs

Answer Clike
You want to create a thick provisioned LUN within a thick-provisioned volume.
Which 2 actions will accomplish this task? (Choose two.)


A. Use the vol create command with a guarantee parameter set to none
B. Use the vol create command with a guarantee parameter set to volume
C. Use the lun create command with the space-reserve parameter set to enabled
D. Use the lun create command with the space-reserve parameter set to disabled

Answer Clike
An administrator has an existing FAS3210 running DATA ONTAP 8.2.4 7-mode. They have recently purchased and installed a new AFF A300 ONTAP cluster and need to non-disruptively migrate FC LUNs from the 7-mode system to the new cluster. The administrator has cabled the FC interfaces shown in the exhibit.
In this scenario, which additional cabling will be needed on the AFF A300 to support foreign LUN import 7mode?


A. AFF A300 node 1: interface 2a to MDS switch Fabric “A” AFF A300 node 1: interface 2b to MDS switch Fabric “A” AFF A300 node 2:
interface 2a to MDS switch Fabric “B” AFF A300 node 2: interface 2b to MDS switch Fabric “B”
B. AFF A300 node 1: interface 2a to MDS switch Fabric “A” AFF A300 node 1: interface 2b to MDS switch Fabric “A” AFF A300 node 2:
interface 2a to MDS switch Fabric “A” AFF A300 node 2: interface 2b to MDS switch Fabric “A”
C. AFF A300 node 1: interface 2a to MDS switch Fabric “A” AFF A300 node 1: interface 2b to MDS switch Fabric “B” AFF A300 node 2:
interface 2a to MDS switch Fabric “A” AFF A300 node 2: interface 2b to MDS switch Fabric “B”
D. AFF A300 node 1: interface 2a to MDS switch Fabric “B” AFF A300 node 1: interface 2b to MDS switch Fabric “B” AFF A300 node 2:
interface 2a to MDS switch Fabric “B” AFF A300 node 2: interface 2b to MDS switch Fabric “B”

Answer Clike
Which NetApp resource would you use to validate the maximum number of FC hops that are supported by a switch vendor?

A. Hardware Universe
B. Switch Install Guide
C. Installation and Setup Instructions Poster
D. SAN Configuration Guide

Answer Clike
You need to determine the maximum LUN size per host operating system.
Which resource has this information?


A. Logical Storage Management Guide
B. SAN administration guide
C. Software Setup guide
D. SAN configuration guide

Answer Clike
A 4-node cluster is upgraded from clustered Data ONTAP 8.2 to ONTAP 9.1. LUNs that were created after the upgrade are visible only on the target ports of the node that owns the LUN and its HA partner. LUNs that were on the system before the upgrade are visible on all target ports. You want all LUNs to have paths only to the owning HA pair.
In this scenario, which non-disruptive action would accomplish this task?


A. Add reporting nodes to the LUNs created on clustered Data ONTAP 8.2
B. Add reporting nodes to the LUNs that were created after the upgrade to ONTAP 9.1
C. Re-create the LUNs that were on the system when clustered Data ONTAP 8.2 was running
D. Reboot the fabric switches one at a time

Answer Clike
Which resource identifies the number of UTA2 ports available on a FAS8020 controller?

A. Hardware Universe
B. Interoperability Matrix Tool
C. Universal SAS and ACP Cabling Guide
D. Config Advisor

Answer Clike
You notice that reporting nodes are not mapped on a LUN in a 4-node cluster that originally ran an older version of ONTAP. In this scenario, which command would you use to add only the local HA pair to the reporting nodes for the /vol/data/lun1/LUN?


A. Lun mapping add-reporting-nodes –vserver svm1 –path /vol/data/lun1 –igroup igroup1 destination-aggregate data
B. Lun mapping add-reporting-nodes -path /vol/data/lun1 –igroup igroup1 –all false
C. Lun mapping add-reporting-nodes –vserver svm1 -path /vol/data/lun1 –igroup igroup1–local nodes true
D. Lun mapping add-reporting-nodes –vserser svm1 -path /vol/data/lun1 –igroup igroup1 destination-volume cl01_01_aggr1

Answer Clike
For testing LUN mobility, you are moving a volume that contains a LUN to a different HA pair within the same ONTAP cluster. You want to ensure that the host does not lose access to the LUN that is in the volume being moved. Which action should be performed to accomplish this task?

A. Create a snapmirror of the volume to the destination.
B. Modify the reporting nodes to add the node of the destination and its HA partner.
C. Verify that the volume has snapshots copies enabled.
D. Verify that is enough free space on the volume that is being moved.

Answer Clike
You have a host with multiple initiator ports attaching to a single SAN LIF. With this setup, which action is required?

A. You must use host multipathing software.
B. You must use an individual SAN LIF for each initiator port.
C. You must use a portset.
D. You must use a SAN LIF failover group.

Answer Clike
Which two flags would you use to enable NetApp thin provisioning on a LUN? (Choose two.)

A. -spacereserve enabled -spaceallocation enabled
B. -spacereserve enabled -spaceallocation enabled
C. -spacereserve disabled -spaceallocation disabled
D. -spacereserve disabled -spaceallocation enabled

Answer Clike
A volume with a single LUN shows 30% deduplication savings. However, the output of df on the cluster does not show the 30% savings back to the volume or aggregate.
What is causing this behavior?


A. Volume space guarantee is set to none.
B. Volume space guarantee is set to volume.
C. LUN space reserve is disabled.
D. LUN space reserve is enabled.

Answer Clike
A customer wants to set up storage so that the LUNs have no possibility to go offline. There are multiple LUNs per volume. There should be extra available space in the volume for snapshot copies.
Which two configuration settings would accomplish task? (Choose two.)


A. Volume guarantee = volume LUN reservation = enabled Fractional reservation =100% Snapshot autodelete = disabled Autogrow = enabled
B. Volume guarantee = none LUN reservation = enabled Fractional reservation =0 Snapshot autodelete = enabled Autogrow = enabled
C. Volume guarantee = volume LUN reservation = enabled Fractional reservation =0 Snapshot autodelete = disabled Autogrow = disabled
D. Volume guarantee = volume LUN reservation = enabled Fractional reservation =100% Snapshot autodelete = enabled Autogrow = disabled

Answer Clike
Which two resources would you use to determine the number of UTA2 ports and the availability of FC support for an AFF A300? (Choose two.)

A. Config Advisor
B. Unified Host Utility Kit
C. Interoperability Matrix Tool
D. Hardware Universe

Answer Clike
What is the correct provisioning order of a new ONTAP storage solution?

A. LUNs, volumes, aggregates
B. LUNs, aggregates, volumes
C. Volumes, aggregates, LUNs
D. Aggregates, volumes, LUNs

Answer Clike


A. Core-edge
B. Star
C. Partial mesh
D. Mesh

Answer Clike
Referring to the volume v_iscsi_exch01 shown in the exhibit, which two LUN combinations can you create? (Choose two.)


A. Five LUNS, each LUN 3GB in size, with the LUN option space-reserve set to enabled
B. Three LUNS, each LUN 5GB in size, with the LUN option space-reserve set to enabled
C. Two LUNS, each LUN 5GB in size, with the LUN option space-reserve set to disabled
D. Four LUNS, each LUN 1GB in size, with the LUN option space-reserve set to enabled

Answer Clike
You want to ensure maximum performance of iSCSI LUNs. Which statement is correct in this scenario?

A. Configure your network to have Layer 3 switches.
B. Enable flow control on the switch.
C. Set the MTU size to 9000.
D. Use 1GbE instead of 1OGbE.

Answer Clike
What are two important considerations when issuing the lun move start command? (Choose two.)

A. Storage efficiency deduplication metadata is moved with the LUN.
B. The lun must have a load-sharing mirror to ensure availability during the move.
C. The size of the destination volume must or exceed the size of the LUN.
D. LIFs should be available on the destination HA pair.

Answer Clike
To provide host connectivity for both SAN and NAS protocols, which combination is valid?

A. UTA2 configured as FC connected to an FCoE-enabled switch with CNAs in the host
B. UTA2 configured as FCoE connected to a FCoE-enabled switch with FC HBAs in the host
C. UTA2 configured as 10Gb Ethernet connected to an Ethernet switch with CNAs in the host
D. UTA2 connected to an FCoE-enabled switch with CNAs in the host

Answer Clike
You have a host that loses connectivity to a LUN after a volume is moved from one node to another node in the cluster. You verified that you do not have a problem with the cluster, a switch, or reporting nodes.
Which two actions will help determine the problem? (Choose two.)


A. Verify the HBA timeout settings.
B. Verify that the SnapDrive version is supported for the host and ONTAP version.
C. Verify that the SANtricity Storage Manager version is supported on the host.
D. Verify that MPIO and ALUA are enabled.

Answer Clike
You notice that a host is performing poorly and that the load on the storage system is higher than expected.
In this scenario, which statement is correct?


A. The host application administrator is currently logged into the host.
B. Cluster node clocks are not synchronized.
C. The cluster node has only one spare disk.
D. The LUN I/O is misaligned.

Answer Clike
You are connecting a controller to a 10Gbps switch that is 10 meters away. Which type of cabling is required in this scenario?

A. short range SFP with LC-LC multimode
B. FC SFP with LC-LC optical
C. Twinax
D. long range SFP with LC-LC multimode

Answer Clike
You are configuring a Fibre Channel SAN in your cluster for the first time. In this scenario, which switch feature is required for ONTAP Fibre Channel SAN to operate correctly?

A. Dynamic Path Selection (DPS)
B. Forward Error Correction (FEC)
C. N_Port ID Virtualization (NPIV)
D. iSCSI Type, Length, Value (TLV)

Answer Clike
An administrator has a 4-node NetApp cluster that was originally installed with clustered Data ONTAP 8.3. The administrator is going to upgrade to ONTAP 9.1.
What are two considerations for the upgrade process? (Choose two.)


A. The administrator must do an intermediate upgrade to ONTAP 9.0, before upgrading to ONTAP
B. Reporting nodes will be set by default on all LUNs after the upgrade process.
C. A rolling upgrade needs to be used for this process-because of the current ONTAP version.
D. All LIFs must reside on their home ports prior to the upgrade.

Answer Clike
ONTAP DSM 4.1 is the multipathing option for which host operating system?

A. VMware ESXi 6.0
B. Redhat Linux 7.0
C. Windows Server 2012R2
D. Oracle Solaris 11

Answer Clike